Can You Add Distilled Water To A Battery

Of course if you dont go up and down steep slopes or rear peg your way round bends depends on how the battery is mounted there should be no problems.
Can you add distilled water to a battery. Adding Water For Batteries distilled water. Safety and leveling of water in the battery. Do not overfill the cell as that will cause electrolyte solution and battery capacity to.
Adding chemicals and minerals can significantly decrease the life of batteries. See photo example Battery manufacturers also recommend using only distilled or deionized water and to use a watering gun or pitcher to fill each battery cell. Also adding too much water can dilute the electrolyte solution resulting in poor battery performance.
How to fill the battery of the car bike ATV or quad wth distilled water. You will fill the water in the levels that are safe. Fill each cell with distilled water until the cell is full up to the top of the fill hole.
I have never had one last very long after the fill up. An air compressor will come in mighty handy to get rid of any dust so it will not mix with the water you are going to use especially the dust around important battery. Use only distilled water to fill the cells.
The proper fill level according to battery manufacturers is approximately 14-inch below the fill well bottom. Maintenance of the battery. To be safe distilled water is your best bet and is a much smaller investment than a new battery.
Electrolyte is corrosive and can cause damage to the battery and surrounding equipment. The electrolyte in a flooded deep cycle battery is a solution of acid and water. See if your battery is dusty or dirty and use a dishcloth to clean without water.



















